Proliant server configuration and CallManager

[kemals]

Hello,

Few days ago I received an offer to buy Proliant DL380 G3 with configuration listed below. However, i am not sure that i will be able to install CallManager (which i need for studies) because processor listed below does not match ones that are listed on cisco requirements site (this one is having more processing power than required).

Could you please let me know what are your experiences about it, em I gonna be able to install CallManager on this configuration?

Thanks in advance!


Model : HP ProLiant DL380 G3

Processor
Model : 2x Intel(R) Xeon(TM) CPU 3.20GHz
Speed : 3.18GHz
Cores per Processor : 1 Unit(s)
Threads per Core : 2 Unit(s)
Integrated Data Cache : 2x 8kB, Synchronous, Write-Thru, 4-way, 64 byte line size, 2 lines per sector
L2 On-board Cache : 2x 512kB, ECC, Synchronous, ATC, 8-way, 64 byte line size, 2 lines per sector
L3 On-board Cache : 2x 1MB, ECC, Synchronous, ATC, 8-way, 64 byte line size, 2 lines per sector

System
BIOS : HP P29 (07/25/2003)
Bus(es) : X-Bus PCI USB i2c/SMBus
Multi-Processor (MP) Support : 2 Processor(s)
Multi-Processor Advanced PIC (APIC) : No
Total Memory : 2GB

Chipset
Model : ServerWorks CNB20-HE Host Bridge
Front Side Bus Speed : 4x 132MHz (528MHz)

Memory Module(s)
Memory Module : Hynix (Hyundai) HYMD264G726A4M-H 512MB ECC DDR Registered PC2100R DDR-133 (2.5-3-3-6 2-9-0-0)
Memory Module : Hynix (Hyundai) HYMD264G726A4M-H 512MB ECC DDR Registered PC2100R DDR-133 (2.5-3-3-6 2-9-0-0)
Memory Module : Micron 18VDDT6472G-265C3 512MB ECC DDR Registered PC2100R DDR-133 (2.5-3-3-6 2-9-0-0)
Memory Module : Micron 18VDDT6472G-265C3 512MB ECC DDR Registered PC2100R DDR-133 (2.5-3-3-6 2-9-0-0)

Storage Devices
COMPAQ LOGICAL VOLUME 72.8GB (RAID, 15000rpm, NCQ) : 68GB
COMPAQ LOGICAL VOLUME 72.8GB (RAID, 15000rpm, NCQ) : 68GB
TEAC DW-224E (ATA, DVD-R, CD-RW, 2MB Cache) : N/A (E

Peripherals
LPC Hub Controller 1 : ServerWorks CSB5 PCI to ISA Bridge
LPC Legacy Controller 1 : T0 EE-15h
Serial Port(s) : 1
Disk Controller : ServerWorks CSB5 PCI EIDE Controller
Disk Controller : HP Smart Aray 5i Card
USB Controller 1 : ServerWorks OSB4 OHCI Compliant USB Controller
SMBus/i2c Controller 1 : Broadcom OSR SMBus

Network Services
Network Adapter : BCM5703 Gigabit Ethernet (Ethernet, 100Mbps)
Network Adapter : BCM5703 Gigabit Ethernet #2

Power Management
Mains (AC) Line Status : On-Line

 

[pndscm]

Here's an offer for a server that is very similar to yours. I don't think the processor speed is a problem. I was concerned about you having dual processors as this was not supported in the past.

http://toronto.kijiji.ca/c-buy-and-...ager-7-0-Server-CCIE-VOICE-W0QQAdIdZ121290992

 

[JcBWF]

I know when we did our last upgrade, the equipment had to MATCH PERFECTLY. We bought one that was more than what they required and it took about 10 seconds for the install\upgrade to shutdown and not like the hardware.


Perfection is expected, Excellence is Tolerated