Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Proliant ML350 G3 smartstart

Status
Not open for further replies.

covski

IS-IT--Management
Mar 7, 2003
49
GB
Hi,

Just got a new server, plumbed in a VS80 DLT drive, 642 array controller and a bunch more memory.

Just fired it up and it won't boot from the smartstart CD, the CD drive spins up and the light comes on but thats about it.

Additionally the array controller initialises and I can use the option ROM to configure a logical drive.

The instructions refer to pressing F9 for the RBSU, this doesn't seem to work.

Any ideas folks???
 
Sorted it,

When I unplugged the SCSI disk from the mobo and into the array controller I reused the mobo slot for the DLT drive. It didn't like it.

Switching the DLT drive the other slot sorted it out.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top