I have a Proliant 3000/ 333 with a 2/P controller and have 8 4.3 gig drives in the array cage. I have green lights on all of the drives, except the one in the upper left corner. I cannot see the drive when setting up the raid array. When i move the drive to any other spot it turns green and whichever one i move there goes yellow. I have blown compressed air and checked visually and cannot see any problems with the cage. I would appreciate any help with matter.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Proliant 3000 T /333 Raid array help
- Thread starter wmbair
- Start date
I would suggest that the slot is faulty and you probably need a replacement disk cage backplane. Contact your supplier/warranty people. -----------------------------------------------------
"It's true, its damn true!"
-----------------------------------------------------
"It's true, its damn true!"
-----------------------------------------------------
- Status
Similar threads
- Locked
- Question
- Locked
- Question