Proliant 1600 Array Configuration

[DigiWeeZ]

Hi!
I have a Proliant 1600 and I have added 2 new scsi disks to the hotswap and removed all the old ones. The disks are okay, and there is only left to config this Array. The Array is SMART-2DH.
When I boot i get "Run Compaq Array Configuration Utility". Well..ok, so I start looking for this utility, but I just cant find the one that works. Is there anyone who knowes or can give me a link to the one I need.

Tnx Digi

 

[TheLad]

You will need the SmartStart v5.5 or earlier CD (or you can download the Array Utility from HP.COM). If you search previous posts, there should be a link where you can download the CD

-----------------------------------------------------
"It's true, its damn true!"
-----------------------------------------------------

 

[DigiWeeZ]

Tnx!
I have the 6,0 version and that maybe it!

Cheers

 

[TheLad]

Don't think v6 will work on a PL1600, can try it but you may be better off trying to get v5.5

-----------------------------------------------------
"It's true, its damn true!"
-----------------------------------------------------

 

[DigiWeeZ]

I have tried it, doesnt work properly, so I`m downloading 5.5 now.