Proliant 1600 6/450

[BeastNH]

Greetings

I have a proliant server with a single Pentium 2 450 Processor and 512 Meg Ram. I have seen other posts about the F1/F10 Issue but the problem I am having is the CD I have for the System Configuration Doesnt seem to work on this model. How do I get into the Bios (version P08) 11/08/2000 to change system options for the code I get 162 No System Options Set

Thank you for your time

Jon

 

[Walter349]

You need smartstart 5.5 or lower, you can get it from the website. If you don't have a config partition on the HDD drive or a valid version of smartstart, there is little that can be done as yet.