programming speed dial on 9641

[gwmyers]

CM6.3 G450 S8700

How to Program an AutoDial key on a 9641

 

[Sean655]

If you program the autodial on buttons 5-8 it will show up on the bottom of the phone screen when the "phone" screen is pulled up. You can also get one to show up on the icon screen by adding it as a contact through the 9641 menu and then setting it as a favorite.

 

[gwmyers]

Thank You for Your Reply

How about adding an autodial to the BM12 sidecar

 

[Sean655]

Last page of the station form after the module has been administered on page one unless there's something else you might be asking about.

 

[gwmyers]

BUTTON MODULE #1 ASSIGNMENTS

1: autodial
2: autodial
thru
24: autodial

i thought once you program the button for autodial
the user could program their numbers

i can put them in using Site Admin

 

[Sean655]

There's a Program Feature Access Code that can be set and given to the user. I don't have a sidecar set up but I used a blank autodial on my 9641. My steps were:
1. Enter feature code - get dial tone
2. Hit the autodial button that I want to program
3. Enter the phone number
4. Hit # when finished

 

[gwmyers]

What is the Program Feature Code #

I don't find anything in display feature-access-code

Thank You

 

[gwmyers]

To Program a Speed Dial (SD) Button:
1. Lift handset, dial (feature-access-code)
2. Press SD button to be programmed
3. Enter the number as you would normally dial
4. Press the "#" key, confirmation tone is heard

How to program a feature-access-code for Speed Dial

 

[Sean655]

Look on page 3 of FAC screen. It's called 'Program Access Code'. Add a new code if there's nothing there.

 

[gwmyers]

change feature-access-codes
tab 3
Program Access Code: *83

To Program a Speed Dial (SD) Button:

1. Lift handset, dial *83
2. Dial Tone
3. Press SD button to be programmed
Button 1 on Button Module
4. Enter the number as you would normally dial
5. Press the "#" key, confirmation tone is heard

Thank You
Thank You
Thank You