Programming Keys on 2616 4

[jawalla]

I am trying to program the keys on a 2616 phone but cannot recall the codes for various keys. Can someone help with the codes for the kes, please.

Thanks, Jay

 

[johnpoole]

with about 60 choices it might help if you list the keys you need

john poole
bellsouth business
columbia,sc

 

[jawalla]

The following buttons are the primary ones I need:

Conference
Forward
Call Pickup
Sys Speed
Transfer
Speed Call
Auto Dial
Display
Messages
Handsfree
Autodial buttons (to be setup by user)

Regards, Jay

 

[coniglio]

conference - AO6 (letter O, not zero)
forward - CFW 4 (or however many digits you want them to fwd to)
call pickup - RNP
System Speed - SSU + list number(this lets them use system speed list X, but not change it)
transfer - TRN
speed call - SCC plus list number
autodial - ADL 4 (or however many digits you want to put on autodial key)
display - DSP
message - mwk followed by voicemail DN
handsfree - make CLS HFA and key 15 automatically becomes handsfree

 

[johnpoole]

Conference ao6
Forward cfw 4 (max number of digits)
Call Pickup rnp
Sys Speed
Transfer trn
Speed Call
Auto Dial adl 16
Display (only on acd) dwc (acd grp no)
Messages MWK (vm dn)
Handsfree
Autodial buttons (to be setup by user) adl

handsfree is hfa in class, system speed and speed call are a little deeper then just the key..the pick key need the rnpg on the set the same as the other phones in that dept. plus pua in class

best way to go is ld 11 cpy 2616
it will ask from and to and number for key 0.


john poole
bellsouth business
columbia,sc