Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Programming an IVR in KX series?
- Thread starter skulmat
- Start date
WhiteGooner
Programmer
You will need an OPB3 with DISA card or get a TVM.
I dont think TDA has built in DISA
I dont think TDA has built in DISA
obtsystems
Programmer
Whitegooner is correct no disa by default. Opb3 ans esvm card for 100/200 or esvm card for 15/30
Hi,
A kx-tva is the same as a kx-tvm, it just depends what country you are in. They connect to the phone system i.e. kxtda, kxtde or ncp via a digital proprietary phone port which gives you two voice channels between the two units and all the handshaking. The ivr is programmed using custom service menus of the kx-tva/kx-tvm. Or as the guys have said above get the esvm card to go on the tda, tde or ncp.
A kx-tva is the same as a kx-tvm, it just depends what country you are in. They connect to the phone system i.e. kxtda, kxtde or ncp via a digital proprietary phone port which gives you two voice channels between the two units and all the handshaking. The ivr is programmed using custom service menus of the kx-tva/kx-tvm. Or as the guys have said above get the esvm card to go on the tda, tde or ncp.
- Status
Similar threads
- Locked
- Question