Programming a Route for Bell Megalink

[hwking]

I got a Bell Megalink circuit. 1 T1, 5 LDNs. Bell is not providing any information on what that means for my PBX. Does anyone know how this should be programmed. I presume it is an ISA route, but not sure. I've tried programming an ISA with COT trunks, but get call barred. Does anyone have any experience with this?

 

[PERRYPJ]

If they don't give you what is on the channels how are you going to program them

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[hwking]

that's my problem. How am I going to program them. Bell and I seem to be speaking a different language. When I ask what kind of service I have, I am told it is a megalink with 23 B channels and 5 Inward numbers. I have no idea how that translates into trunks and routes on a CS1000. I have configured an ISA route with a COT route and a DID route. That doesn't work. I tried a Tie route only, no ISA, that locked out the DMS. So I am wondering if someone out there has experience configuring a megalink on a PBX.

 

[PERRYPJ]

What Bell is telling you that you have an ISDN-PRI with 23 B channels and 1 DCH channel. You need to configure 23 channels (1-23)
as DID trunks

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[bhassell2000]

rdb type did
dch type did

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell