Programming a Night Button

[frigidzephyr]

Can i get a short answer on how to program a night mode button on a
H-103 system, ( have no experience with lucents systems)
ive programmed panasonics and some others though. Or a good online reference - to a manual or somthing would be great! thanks..

 

[pjolly]

I'm not familiar witht the designation "H-103", so the following may not apply. This is the programming for a Partner ACS (& earlier versions, I believe, such as Partner Plus):

At extension 10, press the feature button, then dial 00;
Press the left intercom button twice;
Press the pound key (#) and dial 5033;
Press the button that will be the night service button (cannot be a line button);
Press the feature button and dial 00 to save and exit.

That's the fast answer. Here's the rest...

The night service button toggles between day and night service. Be sure the programming settings are correct for voice mail (i.e. lines assigned to vm group, number of rings set for day and night, hunt schedule set to "always").