Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Programming a IPK VM

Status
Not open for further replies.

RayBob

Vendor
Nov 24, 2008
27
US
Ican log into the voice mail ok. When I highlight the greeting to be heard my F10 to play doesn't work. F9 does. Any sugestions.
 
Assuming you have a DOS VMP card...

you need to be called into the voice mail via a phone. dial the pilot number and watch the ports in the top left. use f3 to toggle the ports. when you see the voice mail answer your call, toggle to the port you are on using f3 and press f4 for a local connect. this will enable you to play the greeting through the phone.

"However beautiful the strategy, you should occasionally look at the results." Sir Winston Churchill
 
Thanks for the info. Tried it , works great.
 
Gald I could Help :)

"However beautiful the strategy, you should occasionally look at the results." Sir Winston Churchill
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top