Programming a Call Pickup

[Diny]

Hi I need to program a call pick for a M8003 phone.

A.

M8003 M2616
Ext. 3767 to pick up calls on Ext. 3766

B.

M2616 M2616 M8003
Ext. 3712 to pick calls on Ext. 3709 and Ext. 3711

thanks

 

[Reusser]

I think the 8003 are programmed as analog phones.

Req: CHG
Type: 500
TN: (enter the TN fot the 8003)
RNPG: Enter a call pickup group 0-4095. use a pickup group not in use.
CLS: PUA

for the 2616
Req: CHG
Type: 2616
TN: (Enter the TN for the 2616)
RNPG: Enter the same pickup group number as assigned for the 8003
Key x RNP


The 2616 just needs to go off hook and press their RNP button to answer the call ringing on the 8003. The 8003 would have to dial a FFC code for ringing number pickup or your Spree code plus 3 to answer a call ringing on the 2616.
Use this same senerio to programm the other group - just use a different RNPG number.