Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Programming a 1140
- Thread starter john219
- Start date
The latest firmware versions for the 1140 assume that you are sending a lot of the configuration values via DHCP.
If you are manually configuring the phone, you will need to go into the Network Configuration menu, press the Auto button, and uncheck any of the items you want to set manually - there is also an 'AllMan' button which will deselect everything for you. Once you are done, press the 'Config' button, then 'Apply'.
If you are manually configuring the phone, you will need to go into the Network Configuration menu, press the Auto button, and uncheck any of the items you want to set manually - there is also an 'AllMan' button which will deselect everything for you. Once you are done, press the 'Config' button, then 'Apply'.
- Status
Similar threads
