Programing Page button

[conceptsottawa]

First off let me say Thank you to all those that have helped me with programming my system. The help is very much appreciated.

I have an M7208 Phone. It has a page and an intercom button. I need it to do an all sets page with 1 button. My 7310 phones asks for page choice but my M7208 does not.

Thanks in advance,

David.

 

[allworxguy]

Might be the feature card. What's the software version of the flash?

Marv ccna

http://www.telemarv.ca

Sales, Installation & Service for Norstar, BCM & Allworx
Serving Ottawa and Eastern Ontario since 1990

 

[norstarboy125]

Press feature *3
press the page button ( button u want to be page )
Press feature 630- all page
done

Jeremy J. Carter
Charm City Communications

http://www.charmcitycommunications.com

Norstar. BCM. CS1000 Programmer

 

[GordonKapesMZ4]

Probably my all time paging feature ever! Feature 630! I always wondered why stores used feature 62 only, 630 is much more comprehensive!

"Keep the Peace, Use RLS"

http://www.joetheucxguy.com

 

[conceptsottawa]

excellent that worked, i didn't press the feature button before the 630. Worked great. Thanks again

 

[curlycord]

F62 is good for paging just overhead speakers
F630 is good for paging both all sets and overhead speakers.
F613 is best for just paging all sets.

See FAQ's for more info:

http://www.tek-tips.com/faqs.cfm?fid=7657

=----(((((((((()----=
curlycord

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[norstarboy125]

You had to press feature then the code or it wouldn't of programmed to the button.

Jeremy J. Carter
Charm City Communications

http://www.charmcitycommunications.com

Norstar. BCM. CS1000 Programmer