Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Programing Anglog Set

Status
Not open for further replies.

freetime17

Technical User
Mar 10, 2010
2
US
Have 12 anglog phones already up and able to place outside calls. need to know if there is anyway to , either build a route or any soultion so that anyone using these phone will not have to put in LD code when placeing a call , just these phone only. Useing for a fundraiser. Need help!!!!!
 
If the LD codes are put on by the carrier and not by the PBX then the answer is no. If the PBX is doing it then you can set their NCOS high enough not to need the Auth Code or possibly change their CLS to AUTU which is auth code unrestricted.
 
I also tried to used m2008 with autodial key , is their a way to turn on dtmf when using autodial?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top