Homerscooby
IS-IT--Management
Hi folks,
does anyone have the steps; loads to program a T1 on a Nortel 81c?
I know where to find the loads in the book but I want to see the actual steps.
I will need to program the route, trunks and T1's.
No d-channel required.
Other end says this is the format;
Switch Type 4ESS
Framing – ESF
Line Coding – B8ZS
Supervision – Wink Start (On trunks side – wink/wink)
Digit Characteristics – DTMF
Direction – BOTH
does anyone have the steps; loads to program a T1 on a Nortel 81c?
I know where to find the loads in the book but I want to see the actual steps.
I will need to program the route, trunks and T1's.
No d-channel required.
Other end says this is the format;
Switch Type 4ESS
Framing – ESF
Line Coding – B8ZS
Supervision – Wink Start (On trunks side – wink/wink)
Digit Characteristics – DTMF
Direction – BOTH