Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Program a pstn line in a key of digital phone

Status
Not open for further replies.
Jul 12, 2019
40
SA
Help pls on MD110 pabx bc 13. Need to assign a pstn line on one of the key in a digital phone extension. Program ADN and create a route for an analogue trunk card. Procedure please. Thanks
 
Thank you very much inlsp05. May you pls advise step by step procedure. TIA.
 
I would make the ADN with ksani (dir, key, odn, adn).
Then the PSTN route with rocai, rodai,roeqi, rodni- where day/nig answering position would be the ADN.
Just an overwiew to start up on.

///doktor
____________________________________
 
<ROCAI:ROU=57,SEL=7110000000000010,TRM=4,SERV=2000000000,SIG=300000000000,TRAF=00151515,BCAP=001100;EXECUTED

<RODAI:ROU=57,TYPE=TL11,VARI=00000188,VARO=00002814,VARC=00000012;EXECUTED

<ROEQI:ROU=57,TRU=1-1,EQU=001-1-72-01;EXECUTED

<RODDI:ROU=57,DEST=88007,SRT=6;EXECUTED

<KSANI:DIR=XXXX,KEY=1,ADN=89007,CAT=7,CALALT=1;EXECUTED

<RODNI:ROU=57,TRU=1-1,DAY=89007,NIG=89007;EXECUTED

<SPEXI:DIR=89007,OPT=N,NDC=A0A101B88007;EXECUTED

 
Hi doktor and pviorel. Thank you both on your advices and directions. ADN was program succesfully.😊
#jim#
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top