Progamming an T/R station 1

[miketanaka]

I am new to Merlin (working with Meridian One only) I am trying to program a T/R station for a fax on a 016 TRR card on a Merlin R4 system and I cannot get it to direct a ISDN BRI DN to ring on the fax line. ALl lines seem to ring on the fax line. I have programmed the line for only the one trunk and still all lines are answered there. What am I doing wrong?

 

[Pepperz]

look at the extensions>lines/trunks, and if you are putting a line that is pooled, onto that extension, then all lines will ring in on it. Fix: put on an unpooled line, or if using DNIS, renumber the extension to the desired DNIS.

Pepperz at newper dot net

 

[miketanaka]

Thanks a lot that did it.