network based on vlan10.
Servers:
Domain Controller : 192.168.10.5 Gt 192.168.10.1
Dns 127.0.0.1 Alt. Dns 192.168.10.7
Backup: 192.168.10.7 Gt 192.168.10.1
Dns 127.0.0.1 Alt. Dns 192.168.10.5
Internet through Kerio FW: 192.168.10.4 Gt 192.168.10.1 Dns 192.168.10.5 Alt. Dns 192.168.10.7
Remote Lan through Kerio FW: 192.168.10.11 Gt 192.168.10.1 Dns 192.168.10.5 Alt. Dns 192.168.10.7
Applications: 192.168.10.6 Gt 192.168.10.1
Dns 127.0.0.1 Alt. Dns 192.168.10.9
Protocol : 192.168.10.9 Gt 192.168.10.1
Dns 127.0.0.1 Alt. Dns 192.168.10.6
vlan10 ip on switch building 1 is:192.168.10.1 (default gateway)
vlan10 ip on switch building 2 is:192.168.10.2
vlan10 ip on switch building 3 is:192.168.10.3
vlan10 ip on switch building 4 is:192.168.10.25
Each Building has 2 groups of host: group “a & b” are working on same vlan10 with static ip: 192.168.10.x and gt: 192.168.10.1
host’s “A” are able to go to internet: dns 192.168.10.6 alt dns: 192.168.10.9 and they have not to be able to go to remote lan .
host’s”B” are able to go to remote lan: dns 192.168.10.5 alt dns: 192.168.10.7 and they have not to be able to go to internet.
host’s “A & B” are able to communicate each other.
all switches have a static table routing:
0.0.0.0/0 192.168.10.4 all traffic goes to internet
10.0.0.0/8 192.168.10.11 all traffic goes to remote lan.
everything is working really fine.
Now I need to add more host’s so I will need more ip’s. I created more Vlan’s and now my network has 4 Vlan’s running through all switches. I want to connect each building to a Vlan and I would like to have same configuration like before, I mean all host’s are able to communicate each other, Host’s “A” can go to internet abnd not to remote LAN, Host’s “B” can go to Remote LAN and not to Internet. All server’s will remain on Vlan10 and switch on building 1 will remain the main switch. I need your help to get this configuration working.
My new configuration should like the follw:
vlan10 192.168.10.x bulding 1 (host’s a & b)
vlan20 192.168.20.x bulding 2 (host’s a & b)
vlan30 192.168.30.x bulding 3 (host’s a & b)
vlan40 192.168.40.x bulding 4 (host’s a & b)
How I can configure my switches?
Thank you Cavalieri.
Servers:
Domain Controller : 192.168.10.5 Gt 192.168.10.1
Dns 127.0.0.1 Alt. Dns 192.168.10.7
Backup: 192.168.10.7 Gt 192.168.10.1
Dns 127.0.0.1 Alt. Dns 192.168.10.5
Internet through Kerio FW: 192.168.10.4 Gt 192.168.10.1 Dns 192.168.10.5 Alt. Dns 192.168.10.7
Remote Lan through Kerio FW: 192.168.10.11 Gt 192.168.10.1 Dns 192.168.10.5 Alt. Dns 192.168.10.7
Applications: 192.168.10.6 Gt 192.168.10.1
Dns 127.0.0.1 Alt. Dns 192.168.10.9
Protocol : 192.168.10.9 Gt 192.168.10.1
Dns 127.0.0.1 Alt. Dns 192.168.10.6
vlan10 ip on switch building 1 is:192.168.10.1 (default gateway)
vlan10 ip on switch building 2 is:192.168.10.2
vlan10 ip on switch building 3 is:192.168.10.3
vlan10 ip on switch building 4 is:192.168.10.25
Each Building has 2 groups of host: group “a & b” are working on same vlan10 with static ip: 192.168.10.x and gt: 192.168.10.1
host’s “A” are able to go to internet: dns 192.168.10.6 alt dns: 192.168.10.9 and they have not to be able to go to remote lan .
host’s”B” are able to go to remote lan: dns 192.168.10.5 alt dns: 192.168.10.7 and they have not to be able to go to internet.
host’s “A & B” are able to communicate each other.
all switches have a static table routing:
0.0.0.0/0 192.168.10.4 all traffic goes to internet
10.0.0.0/8 192.168.10.11 all traffic goes to remote lan.
everything is working really fine.
Now I need to add more host’s so I will need more ip’s. I created more Vlan’s and now my network has 4 Vlan’s running through all switches. I want to connect each building to a Vlan and I would like to have same configuration like before, I mean all host’s are able to communicate each other, Host’s “A” can go to internet abnd not to remote LAN, Host’s “B” can go to Remote LAN and not to Internet. All server’s will remain on Vlan10 and switch on building 1 will remain the main switch. I need your help to get this configuration working.
My new configuration should like the follw:
vlan10 192.168.10.x bulding 1 (host’s a & b)
vlan20 192.168.20.x bulding 2 (host’s a & b)
vlan30 192.168.30.x bulding 3 (host’s a & b)
vlan40 192.168.40.x bulding 4 (host’s a & b)
How I can configure my switches?
Thank you Cavalieri.