digitalwreckage
IS-IT--Management
Is there a way with the pro curve to inventory the ports in such a way as to get the IP of the system connected to that port?
Thanks
Be excellent to each other
Thanks
Be excellent to each other
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Procurve 4000 Port Id
- Thread starter digitalwreckage
- Start date
- Status
Telnet to the switch, and use the port address tables (under "status and counters") to get the MAC address for the device attached to that port.
Determining the IP address from the MAC address is an exercise left to the reader, though ARP and logs/reservations on your DHCP server would be the easiest ways...
Determining the IP address from the MAC address is an exercise left to the reader, though ARP and logs/reservations on your DHCP server would be the easiest ways...
Solarwinds Engineers editon will do it. Port Mapper is the feature.
- Status
Similar threads
- Locked
- Question