Procomm Plus Settings

[nortelphonediva]

Hi All:
I really need your help I am setting up Procomm Plus to dial in remotely to my Option 81. I know it's set for 1200 baud but have no idea what other settings to choose, Terminal Type, 7-E-1??? I have TTY 7-E-1 now and When it dials in, it connects, but there is blank screen. I hit the enter key and nothing happens. Any help would be appreciated.

Thanks
NortelPhoneGirl
Maui, Hawaii

 

[PERRYPJ]

try setting procomm to 8-n-1

OLD ROLMEN WORKING ON NORTELS

 

[nortelphonediva]

Just tried 8N1 and nothing it is set to VT-100 I assume that's correct?

NortelPhoneGirl
Maui, Hawaii

 

[nortelphonediva]

Let me be more specific with the information that I need - I'm a total Procomm Moron - Never used it on dialup before
Here are my settings:

7-N-1
VT-100
Standard EC
Xon/Xoff
Compression: Enabled

Thanks

NortelPhoneGirl

 

[PERRYPJ]

YOUR GOING TO HAVE TO CHECK IN LD 37 AND SEE IF THE PORT IS DISABLED

OLD ROLMEN WORKING ON NORTELS

 

[johnpoole]

not knowing the settings on the far end and not using procomm at the same time is a major problem. 90 percent of the switches i dial in are 96 8 none and one, term emm vt320. i use atdt commands because i may just dial in once and never need that dir again. enable modem command mode, then atdt plus the number

john poole
bellsouth business
columbia,sc

 

[acewarlock]

I as\lways set speed to auto.