steveluxmoore
Programmer
I'm having problems with the add_drv command.
Initially, due to a hardware configuration problem, the process stalled and I had to kill it.
After rebooting and attempting it again, add_drv gives the error:
"add_drv/rem_drv currently busy; try later"
add_drv is not showing up on the process list, so it has been killed, but is not available.
Any ideas?
Initially, due to a hardware configuration problem, the process stalled and I had to kill it.
After rebooting and attempting it again, add_drv gives the error:
"add_drv/rem_drv currently busy; try later"
add_drv is not showing up on the process list, so it has been killed, but is not available.
Any ideas?