Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Problems with One x client on IPO 4.2.11

Status
Not open for further replies.

Wellerlooi

Vendor
Jan 26, 2007
4
NL
I have a problem with One X client on Symbian/Mobile6. If i dail a number with the Nokia or HTC and its starting with +31XXXXXXXXX it goes wrong, i see only the first 6 DIGITS after +31 and hear only a ringingtone. If i dail 0031xxxxxxxxx it goes good! On the IPO500 we dail no "0" for the outsideline.

Does somebody have the solution for my problem.
See my ini for the HTc.

DID_PREFIX = +312012345;
INTERNATIONAL_DIRECT_DIAL_PREFIX = 00;
NATIONAL_DIRECT_DIAL_PREFIX = ;
HOME_COUNTRY_DIAL_CODE = +31;
ARS_CODE = ;
EXTENSION_LENGTH = 3;
NATIONAL_NUMBER_LENGTH = 10;
USERS_EMERGENCY_NUMBERS = 112;
SETTINGS_PIN = ;

ACTIVE_APPEARANCE_SELECT = ;
AUTO_CALL_BACK_TOGGLE = ;
CALL_FORWARDING_ALL_ACTIVATION = ;
CALL_FORWARDING_BUSY_NO_ANSWER_ACTIVATION = ;
CALL_FORWARDING_DISABLE = ;
CALLING_PARTY_NUMBER_BLOCK = ;
CALLING_PARTY_NUMBER_UNBLOCK = ;
CALL_PARK = ;
CALL_PICKUP_DIRECTED = ;
CALL_PICKUP_GROUP = ;
CALL_PICKUP_GROUP_EXTENDED = ;
CALL_UNPARK = ;
CONFERENCE_ON_ANSWER = ;
DROP_LAST_ADDED_PARTY = ;
EXCLUSION = ;
HELD_APPEARANCE_SELECT = ;
IDLE_APPEARANCE_SELECT = 50;
OFF_PBX_DISABLE = 52;
OFF_PBX_ENABLE = 51;
SPEECH_ACCESS_NUMBER = ;
SEND_ALL_CALLS_DISABLE = ;
SEND_ALL_CALLS_ENABLE = ;
TRANSFER_TO_COVERAGE = ;
TRANSFER_ON_HANGUP = 53;

SUB_MENU_NAME = ;
<Voicemail> = ;
 
NATIONAL_DIRECT_DIAL_PREFIX = ;
HOME_COUNTRY_DIAL_CODE = +31;

NATIONAL_DIRECT_DIAL_PREFIX = 0;
HOME_COUNTRY_DIAL_CODE = 0031;
 
I tried this one too, but it doesn't work. Even when i program the "0" for outsideline is wont work. It works only when i dail the number without the country code.
 
I'm missing the ACTIVE_APPEARANCE_SELECT = ; set it to 50.

y1pzZTEUdok1vrI5cLb3FdPX4PgTPlSONkb5WPjz0x50etSujaMSmhdRCbOx9vASnrRNzzXv0IxNQA

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________
 
These setting must work, I have a HTC TyTN II set like so;

INTERNATIONAL_DIRECT_DIAL_PREFIX = 00;
NATIONAL_DIRECT_DIAL_PREFIX = 0;
HOME_COUNTRY_DIAL_CODE = +31;


y1pzZTEUdok1vrI5cLb3FdPX4PgTPlSONkb5WPjz0x50etSujaMSmhdRCbOx9vASnrRNzzXv0IxNQA

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top