problems with NIU 1

[lancbomb]

With lots of help from "The Doktor", am having problems setting up an NIU for serial conn, to a VMX 100

see printout below, I've tried lots of different settings and also setting extensions to global tones (ICAT 0010)

I dont think there is integration between the 2 systems,
to proove that I tried to get output from my PC on the VM port, (but got nothing).

So amongst other things I killed and re-initiated ports 2 & 3, no joy, so then I set up ports 2 & 3 as plain MML, again nothing,

restarted program units, sfcei'd and also rfexi'd the switch again nothing, port 1 is fine,

possible the NIU is faulty ???

cheers

 

[rfpui]

wich version of FW (NIF) You have on NIU?
CNBIP:BPOS=

 

[doktor]

Hi lancbomb

Of course it will work!!!

You will have to know the s/w level of the MD110 and the firmware level of the NIU board.

In this example, commands are for MD110 BC11:

Initiate the wanted number of analogue extensions:
EXTEIIR=,EQU=,TYPE=EL6,TRAF=03141401,SERV=000010000,TRM=3,
CDIV=000151000,ROC=000001;
Change these extensions to global tones for the VMX-100:
EXCACIR=,ICAT=0010;
Initiate the Voice Mail group:
GHGRI:GRP=,LIM=,SERV=1000,TRAF=15,SEL=11000,QUE=00;
GHGMI:GRP=,DIR=;
Initiate the NIU board:
CNHUI:BPOS=x-x-xx;
IOBPI:NODE=NIU,BPOS=;
Initiate an EQU for Voice Mail V24 on the NIU board:
IOEQI:EQU=X-X-XX-X,IODEV=VMGICI9,USAGE=OUT;
Change Baud rate, Parity, Word-length, stop bits with:
IOIFC:IODEV=VMGICI9,BAUDR=1200,WORDL=7,STPBIT=1,PARITY=EVEN;
Check with: IOIFP;
Initiate the data channel on the NIU board:
ICFUI:IFCIND=5,DFMT=5,UPDFCN=NO,FILLER=32,IODEV=VM-GICI9;
ICFUC:MWF=ALL;
Set the SID (System ID)
ICMWC:SID=5,KFCN=MWC,DIG=group number,DTXT=group number;
Check with:
ICFUP:IFCIND=5;
ICMWP:SID=5;
Initiate the Voice Mail function:
VMFUI:IFCIND=5,VMF=EXTN2,POFMT=2;
Initiate the voice mail function on each analogue extension:
VMPOIIR="first group member",PORT=11,IFCIND=5;
VMPOIIR="second group member",PORT=12,IFCIND=5;
VMPOIIR="third group member",PORT=13,IFCIND=5;
VMPOIIR="fourth group member",PORT=14,IFCIND=5;

VMPOI:GRP=group number,IFCIND=5;

The VMPOP result will then be:
<VMPOP;
VOICE MAIL PORT DATA
DIR PORT IFCIND
10001 11 5
10002 12 5
10003 13 5
10004 14 5
VOICE MAIL GROUP DATA
GRP IFCIND
4000 5
END


On the VMX-100 use the RJ11 connector:
1 to MD110 VM port 11. Analogue extension 10001.
2 to MD110 VM port 12. Analogue extension 10002.
3 to MD110 VM port 13. Analogue extension 10003.
4 to MD110 Vm port 14. Analogue extension 10004.

Best regards doktor

 

[doktor]

Hi again

If you have an ICU2 board then the commands are even easier.

doktor

 

[lancbomb]

Hey Doktor,
Sorry I forgot to add the files,
see below, I think theres a problem with the NIU, as I when I killed it even though I reinitiated ports 2 & 3 as a straight forward MML port I can talk to it, get SSSSSS;
but no prompt.

pulled cards, restyarted prog units and RFEXI,

looking into sw/fw on NIU card,

cheers

LB


===================================
<ALLOP;
ALARM LOG
IDENTITY: INMARSAT-OBC
VERSION: LZY2035152/6/BC10CNA143/R5A

DATE: 03AUG04 TIME: 16:34:45
CLASS: 2
274 DIGITAL TRUNK, CLOCK MALFUNCTION (SLIP)
DATE TIME ALP NOIF UNIT EQU BRDID INF1
03AUG04 16:33:28 3 1 TLP50 001-1-60-00 48 263

CLASS: 1
38 DISTURB. COUNTER INCREASED DUE TO FAULTY PROGRAM EXECUTION
DATE TIME ALP NOIF EQU INF1
03AUG04 16:33:07 2 1 001-0-**-** 0

CLASS: 0
106 FAULTY I/O BOARD OR CONNECTED I/O DEVICE
DATE TIME ALP NOIF EQU BRDID INF1 INF2
03AUG04 16:32:51 1 1 001-0-60-00 106 9 3
RDATE RTIME
03AUG04 16:33:07


===================================

<IODDP;
I/O DEVICE DATA
NODE IODEV/SUBFS BPOS/EQU SIPOS TYPE/USAGE STATUS AUTH
SYSN - 001-0-60 - - IN SERVICE
SYSN SYSDISK1 001-0-60-0 3 ADTX IN SERVICE
SYSSUBFS11
SYSSUBFS21
SYSN SYSTERMINAL 001-0-60-1 - MML - 7
SYSN SYSTERMINAL2 001-0-60-2 - MML - 7
SYSN VOICEMAIL 001-0-60-3 - OUT IN SERVICE
SYSN ETHERNET1 001-0-60-4 - NETWORK/MML - 7
END

===================================

====================================
<IOIFP;
I/O INTERFACE CHARACTERISTICS
IODEV IFACE BAUDR WORDL PARITY STPBIT PROC
SYSTERMINAL V24 ALL 8 NONE 1 ECHO
SYSTERMINAL2 V24 ALL 8 NONE 1 ECHO
VOICEMAIL V24 1200 7 EVEN 1 ECHO
END

====================================


====================================
<ICFUP;
INFORMATION COMPUTER COMMON FUNCTIONS DATA
UPDATING START TIME IS 01:30
MESSAGE WAITING FUNCTIONALITY IS ALL
INFORMATION COMPUTER EQUIPMENT DATA
IFCIND IODEV EQU RATE DFMT UPDFCN PARITY CCHECK
5 VOICEMAIL 4 NO
FILLER=32 ICEXG=NONE USER=NONE
END

======================================

=======================================
<VMFUP;
VOICE MAIL FUNCTION DATA
IFCIND VMF POFMT
5 EXTN2 2
END
========================================

========================================
<VMPOP;
VOICE MAIL PORT DATA
DIR PORT IFCIND
2212 01 5
2213 02 5
2214 03 5
VOICE MAIL GROUP DATA
GRP IFCIND
1001 5
END
=======================================

==========================================
<GHDAP:GRP=1001;
GROUP HUNTING DATA
GRP LIM SERV TRAF SEL QUE CUST RLTC DIR
1001 1 1000 15 110 3 0 2212
2213
2214

END
=============================================

<KSDDPIR=2133;
KEY SYSTEM DIRECTORY DATA
DIR CUST EQU CAT ADN ODN CALALT
2133 001-0-40-01 29 1

END
============================================


============================================
<EXCAPIR=2212&&2214;
EXTENSION CATEGORY FIELDS
DIR TRAF SERV CDIV ROC TRM ADC
2212 00000000 00000000 000000000 000001 0 000000000
2213 00000000 00000000 000000000 000001 0 000000000
2214 00000000 00000000 000000000 000001 0 000000000

END
===============================================

==============================================
<EXDDPIR=2212&2213&2214;
EXTENSION DIRECTORY DATA
DIR CUST EQU CAT TYPE ICAT AUX
2212 001-1-30-09 8 EL6 0000
2213 001-1-30-10 8 EL6 0000
2214 001-1-30-11 8 EL6 0000

END

===================================================


===================================================
<LIDAP;
EIC=02-0000

LICENCE TAG ALLOWED USED
ACD-AGENT 65535 0
ADD-DIRECTORY-NUMBER 65535 0
ANALOGUE-EXTENSION 65535 16
ANCD-FEATURE 1 0
ANCD-V24-INTERFACE 65535 0
APP-LINK-INTERFACE 65535 0
BASE-STATION-DECT 65535 0
CAS-EXTENSION 65535 0
CAS-REX-INTERFACE 1 0
CCM-ETH-INTERFACE 65535 0
CCM-V24-INTERFACE 65535 0
CORDLESS-EXTENSION 65535 0
DIGITAL-EXTENSION 65535 112
DISA-NUMBER 1 0
DUPLICATED-CS 65535 0
DUPLICATED-GS 1 0
EM-ETH-INTERFACE 65535 0
EM-V24-INTERFACE 65535 0
EXTERNAL-LINE-APNSS 65535 0
EXTERNAL-LINE-CAS-ANA 65535 0
EXTERNAL-LINE-CAS-DIG 65535 0
EXTERNAL-LINE-DASS 65535 0
EXTERNAL-LINE-DPNSS 65535 29
EXTERNAL-LINE-ISDN 65535 0
EXTERNAL-LINE-ISDN-NET 65535 0
EXTERNAL-LINE-ISDN-USR 65535 30
EXTERNAL-LINE-QSIG 65535 0
GROUP-SWITCH-LINK 65535 0
IS-ETH-INTERFACE 65535 0
IS-V24-INTERFACE 65535 0
ISDN-TERMINAL-INTERFACE 65535 0
LICENSE-FILE 1 0
NET-SERVICES 1 0
OM-ETH-INTERFACE 65535 0
OM-MML-PORTS 65535 0
OM-V24-INTERFACE 65535 1
OPERATOR-EXTENSION 65535 0
PERSONAL-NUMBER-USER 65535 0
REPEAT-IND-DIV-USER 65535 0
RVA-EXTERNAL 65535 0
RVA-INTERNAL 65535 0
SMDR-ETH-INTERFACE 65535 0
SMDR-V24-INTERFACE 65535 0
TRAFFIC-MEASUREMENT 1 0
VCU-FAX-III-PORT 65535 0
VM-ETH-INTERFACE 65535 0
VM-V24-INTERFACE 65535 1
VOICE-PORT 65535 0
VOICE-SYSTEM 65535 0
END
============================================================

 

[doktor]

Hi

You should be able to login through the EQUs
001-0-60-1 and 001-0-60-2 on the NIU board.
You must change the extension categories by :
EXCACIR=2212&&2214,TRAF=03141401,SERV=000010000,TRM=3,
CDIV=000151000,ROC=000001;
Also EXCACIR=2212&&2214,ICAT=0010;
The IOIFP looks alright.
The VMPOP should be changes to the VMX standard port setting, where the first port is 11.
Do like this:
VMPOIIR="first group member",PORT=11,IFCIND=5;
VMPOIIR="second group member",PORT=12,IFCIND=5;
VMPOIIR="third group member",PORT=13,IFCIND=5;
VMPOIIR="fourth group member",PORT=14,IFCIND=5;

So, now, just plug a serial cable on the NIU port with EQU
= "VOICEMAIL" --- 001-0-60-3.
The license for VM-V24-INTERFACE look allright.

Call again if it does not work.

Regards from the doktor

 

[doktor]

I suppose the star(*) means that you worked it out??
doktor