Problems with NIU

[runlun]

Can anybody tell me why this alarms appears:

CLASS: 2
344 CIL, FAULTY CONNECTION TO NIU PORT
DATE TIME ALP NOIF EQU BRDID INF1
22OCT09 20:33:23 1 1 001-1-72-00 106 1

345 INFORMATION COMPUTER, FAULTY COMMUNICATION CHANNEL
DATE TIME ALP NOIF EQU BRDID
22OCT09 20:37:20 3 1 001-1-72-04 106

I do not believe it is the connections to the NIU, I have restartet the card, but the alarms appears after some secs

Rgds
RunLun

 

[doktor]

It is your SMDR or CDR PC that is disconnected from the NIU.
SMDR = Station Message Detailed recording.
CDR = Call Detailed recording.
Please post:
CLINP;
EDFIP;
IONPP;
IONCP;

SMDR/CDR is a list of all calls that have been made in the system. The SMDR/CDR system must be online all the time, otherwise you will get these alarms.

///doktor

 

[Monrovia]

I think, these two alarms are for same problem.

ie, instead of inserting the SMDR/CDR connector to port 00 of NIU, you inserted it to the port 04. check it.

 

[runlun]

Ok, thanks so far
I checked this remote only by this time
Status now is:

DATE: 25OCT09 TIME: 14:22:17
CLASS: 3
106 FAULTY I/O BOARD OR CONNECTED I/O DEVICE
DATE TIME ALP NOIF EQU BRDID INF1
23OCT09 16:14:33 5 1 001-1-72-04 106 3

278 CIL DATA LOST FOR ONE OR MORE OUTPUT UNITS
DATE TIME ALP NOIF UNIT EQU INF1
25OCT09 04:31:53 7 1 CLOP 002-*-**-** 2

278 CIL DATA LOST FOR ONE OR MORE OUTPUT UNITS
DATE TIME ALP NOIF UNIT EQU INF1
25OCT09 06:11:20 8 1 CLOP 001-*-**-** 2

278 CIL DATA LOST FOR ONE OR MORE OUTPUT UNITS
DATE TIME ALP NOIF UNIT EQU INF1
25OCT09 08:50:41 9 1 CLOP 003-*-**-** 2

278 CIL DATA LOST FOR ONE OR MORE OUTPUT UNITS
DATE TIME ALP NOIF UNIT EQU INF1
25OCT09 14:13:48 3 2 CLOP 004-*-**-** 2

CLASS: 2
344 CIL, FAULTY CONNECTION TO NIU PORT
DATE TIME ALP NOIF EQU BRDID INF1
23OCT09 15:57:21 1 1 001-1-72-00 106 1

345 INFORMATION COMPUTER, FAULTY COMMUNICATION CHANNEL
DATE TIME ALP NOIF EQU BRDID
23OCT09 16:00:02 4 1 001-1-72-04 106

CLASS: 1
114 DEVICE BOARD HAS BEEN ACTIVATED
DATE TIME ALP NOIF EQU BRDID
23OCT09 16:15:08 6 1 001-1-72-00 106


-----
The IO devices are like this:

<IODDP;
I/O DEVICE DATA
NODE IODEV/SUBFS BPOS/EQU I/O-BUS TYPE/USAGE STATUS AUTH
SYSN - 001-0-60 - - IN SERVICE
SYSN SYSDISK1 001-0-60-0 MASTER TOSHIBA IN SERVICE
SYSSUBFS11
SYSSUBFS21
SYSN SYSTERMINAL 001-0-60-1 - MML - 7
SYSN SYSTERMINAL1 001-0-60-2 - MML - 7
SYSN SYSTERMINAL2 001-0-60-3 - MML - 7
SYSN2 - 001-1-72 - - IN SERVICE
SYSN2 CILDATA 001-1-72-0 MASTER SanDisk IN SERVICE
CIL-FS
SYSN2 MML4 001-1-72-1 - MML - 7
SYSN2 GICI 001-1-72-4 - NETWORK/OUT IN SERVICE
SYSN2 MML1 001-1-72-4 - NETWORK/MML - 7
SYSN2 MML2 001-1-72-4 - NETWORK/MML - 7
END

The customer has checked the CIL connection, and it seems like it is ok

Could the NIU2 be faulty?, or need to be disconected and restartet?
Which PU's should be restartet?

RunLun