Problems using setcache with naviseccli in a AX4-5 (Clariion)

[albertojuarez]

Hi experts, actually im newbe using emc stuff, i have a problem using the "setcache" command.

I send it from the server (solaris) to the emc box like this.

/opt/Navisphere/bin/naviseccli -h xxx.xxx.xxx.xxx setcache -wc 0 -rca 0 -rcb 0

So, this is the message.
This command is not supported on this subsystem.

this is the firmware version: 02.23.050.5.705

how can i fix it??

Thanks a lot!!