Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Problems using HAproxy with postfix

Status
Not open for further replies.

Steve Wilson

Systems Engineer
Dec 1, 2018
2
GB
Hello All,

So I have been using HAproxy for a while for web traffic and I thought I would try and use it for incoming email for my domains, my config is as follows
Frontend_xf9gk8.png

Backend_i8ybmr.png


and I have added this to my postfix main.cf
main_cf_excerpt_ffxvnt.png


I can see the source IP in Postfix logs, so it must be parsing the proxy header correctly, and yet immediately after the 220 from postfix, the proxy kills the connection .. see wireshark trace
Wireshark_ozbieg.png


I am running HAproxy 1.7.11 on pfSense 2.4.4 and Postfix is 2.10.1 on Centos 7.
I suspected the cause here might have been the old version of postfix with Centos not compatible with latest proxy protocol being used by HAproxy, but I have also tried replacing the backend with postfix 3.1.4 on Fedora 24 .. and I get exactly the same problem.

Any ideas what I have missed? It is probably something really obvious !!

Steve
 
Problem sorted with help from PfSense forum, the problem was the timeouts on the backend .. they are in ms !

Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top