problems programming a dn on Mics to connect to fastrad

[kingtero]

Are there any special instruction for programming a dn to accept a fastrad to dial into the rad unit instead of a direct connection. The only thing that i can come up with is that it needs to auto answer and needs to be an unsupervised line.

 

[senk1s]

what are you trying to do?
do not understand ur question

 

[Norstarguy]

You don't do anything to the DN the fastrad is connected to to get it to answer-

You have to get into the RAD programming (Feature 9**) and tell it what line to answer.

Hope this helps.

NG

 

[luv2ski]

cant dail the ext to access the device must iether be a trunk answer or a operator assist or a hokey ata back feedin a trunk to be answered by the ata

6 months until ski season starts...sadly i must resign myself to the warmer weather"this will include a normal 8-5 work day, 5 days a week"

 

[kingtero]

Thanks norstarguy, that is exactly what i needed to know. I remember seeing something about a line option when I entered the f9** to program the 10 digit password. I will try the line assigned to that dn number, as soon as I can. Thanks to all.

 

[ManuL]

If you want to pass thru a DN, install an ATA on a free port, plug the Out of ATA on a Line Trunk Card and set the RAD to auto answer this line.... that's it !!

Hope this Help.... ^_^

Manu_L