Problems ELU32

[Omissam]

Good morning, please help me : I have a problem with ip trunks. The md110 PABX does not have an alarm but, it often happens that the boards elu 32 , block.
To make them work, I have to do a reset of the program units, (RFPUI: LIM = ALL, UNIT = TLP65
It often happens that everything works fine: unexpectedly, however,it freezes again.
Can you give me a solution?

Md110 release BC12SP10/R7A
ELU32 Rof1375428/1 R6A
CAA1580022 R7A EXE


Bye, Max.

 

[parnum]

You need to trace on TLP50 and there was a patch at BC12 for same scenario (but may not be the same cause for you, you need to check that). Whether you can get support though at BC12, it's out of sustaining (?).

Problem I saw was fixed by upgrade to TSW and ELU32 latest fw.

best parnum

 

[parnum]

I mean TLP65 trace

 

[Omissam]

Hello Parnum,
I'm sending to you the HIMDP.
Bye Max

HIMDP;

DIAGNOSTICS FROM OPERATING SYSTEM
TIME DATE
18:21:29 28OCT13
DIAGNOSTICS FROM LIM 001, LAST HIREI: 08:42:08 26OCT13

TIME DATE ERROR CODE
16:11:25 28OCT13 H'17
FAULTY INDEX
LOGICAL PROGRAM ERROR ADDRESS = 02077F1C
ENTER
SWSW A-LEVEL SIGNAL CNVNUMRES (H'003B)
FROM NUD (H'371) EXE A IN LIM 001
TO RMP (H'319) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 21
WITH 0 1 2 3 4 5 6 7 8 9
000 00 01 68 03 01 FF FF FF FF FF
010 FF FF FF FF FF FF FF FF FF FF
020 FF

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 01 C2 20

TIME DATE ERROR CODE
14:47:30 28OCT13 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 0204232A
ENTER
SWSW A-LEVEL SIGNAL RELEASE (H'0086)
FROM RMP (H'319) EXE A IN LIM 001
TO TLP65 (H'3BE) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 3
WITH 0 1 2 3 4 5 6 7 8 9
000 00 09 33
STACK ADDRESS = 0203CCCC
SIGNAL SEND ADDRESS = 0208A48C

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 02 10 8E 02 02 0D E4

TIME DATE ERROR CODE
13:45:43 28OCT13 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 0204232A
ENTER
SWSW A-LEVEL SIGNAL RELEASE (H'0086)
FROM RMP (H'319) EXE A IN LIM 001
TO TLP65 (H'3BE) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 3
WITH 0 1 2 3 4 5 6 7 8 9
000 00 07 DC

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 02 10 8E 02 02 0D E4

TIME DATE ERROR CODE
12:52:46 28OCT13 H'60
ADDRESS CONTROL FAILURE
LOGICAL PROGRAM ERROR ADDRESS = 02003C14
ENTER
SWSW A-LEVEL SIGNAL ENTNOPSTA (H'0081)
FROM QMP (H'316) EXE A IN LIM 001
TO ELP6 (H'19D) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 8
WITH 0 1 2 3 4 5 6 7 8 9
000 02 4E D4 0C FF FF 01 00
STACK ADDRESS = 00000001
SIGNAL SEND ADDRESS = 0200423E


TIME DATE ERROR CODE
12:47:37 28OCT13 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 0200A17E
BRANCHVALUE = 00000006
ENTER
SWSW A-LEVEL SIGNAL CONAUX (H'001D)
FROM TSP (H'33B) EXE A IN LIM 001
TO LSP (H'054) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 17
WITH 0 1 2 3 4 5 6 7 8 9
000 00 2F 00 00 00 03 3B 00 A7 02
010 70 74 01 9D 01 01 6A

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 47 82

TIME DATE ERROR CODE
12:45:00 28OCT13 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 0204232A
ENTER
SWSW A-LEVEL SIGNAL RELEASE (H'0086)
FROM RMP (H'319) EXE A IN LIM 003
TO TLP65 (H'3BE) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 3
WITH 0 1 2 3 4 5 6 7 8 9
000 00 02 CD

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 02 10 8E 02 02 0D E4

TIME DATE ERROR CODE
11:39:20 28OCT13 H'17
FAULTY INDEX
LOGICAL PROGRAM ERROR ADDRESS = 02077F1C
ENTER
SWSW A-LEVEL SIGNAL CNVNUMRES (H'003B)
FROM NUD (H'371) EXE A IN LIM 001
TO RMP (H'319) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 21
WITH 0 1 2 3 4 5 6 7 8 9
000 00 48 AE 03 01 FF FF FF FF FF
010 FF FF FF FF FF FF FF FF FF FF
020 FF
STACK ADDRESS = 02000448
SIGNAL SEND ADDRESS = 0200165C

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 01 C2 20

TIME DATE ERROR CODE
11:38:02 28OCT13 H'13
FAULTY POINTER
LOGICAL PROGRAM ERROR ADDRESS = 0200E90E
ENTER
SWSW A-LEVEL SIGNAL TRADATREQ (H'00BA)
FROM TLP60 (H'3BD) EXE A IN LIM 001
TO CMP (H'2D2) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 58
WITH 0 1 2 3 4 5 6 7 8 9
000 FF E3 00 E1 03 BD 01 0E 04 00
010 02 08 7F 00 FF FF FF FF FF FF
020 FF FF FF FF FF FF FF FF FF FF
030 FF FF FF FF FF FF FF FF FF FF
040 00 00 00 00 00 00 00 00 00 00
050 00 00 00 00 00 00 00 00


TIME DATE ERROR CODE
11:38:02 28OCT13 H'13
FAULTY POINTER
LOGICAL PROGRAM ERROR ADDRESS = 0200E90E
ENTER
SWSW A-LEVEL SIGNAL TRADATREQ (H'00BA)
FROM TLP60 (H'3BD) EXE A IN LIM 001
TO CMP (H'2D2) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 58
WITH 0 1 2 3 4 5 6 7 8 9
000 FF E3 00 E1 03 BD 01 0E 04 01
010 80 90 00 FF FF FF FF FF FF FF
020 FF FF FF FF FF FF FF FF FF FF
030 FF FF FF FF FF FF FF FF FF FF
040 00 00 00 00 00 00 00 00 00 00
050 00 00 00 00 00 00 00 00
STACK ADDRESS = 02009D88
SIGNAL SEND ADDRESS = 02027000


TIME DATE ERROR CODE
10:24:46 28OCT13 H'17
FAULTY INDEX
LOGICAL PROGRAM ERROR ADDRESS = 02077F1C
ENTER
SWSW A-LEVEL SIGNAL CNVNUMRES (H'003B)
FROM NUD (H'371) EXE A IN LIM 001
TO RMP (H'319) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 21
WITH 0 1 2 3 4 5 6 7 8 9
000 00 6B 05 03 01 FF FF FF FF FF
010 FF FF FF FF FF FF FF FF FF FF
020 FF

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 01 C2 20

TIME DATE ERROR CODE
10:15:09 28OCT13 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 0204232A
ENTER
SWSW A-LEVEL SIGNAL RELEASE (H'0086)
FROM RMP (H'319) EXE A IN LIM 001
TO TLP65 (H'3BE) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 3
WITH 0 1 2 3 4 5 6 7 8 9
000 00 00 BA

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 02 10 8E 02 02 0D E4

TIME DATE ERROR CODE
12:43:17 27OCT13 H'17
FAULTY INDEX
LOGICAL PROGRAM ERROR ADDRESS = 02077F1C
ENTER
SWSW A-LEVEL SIGNAL CNVNUMRES (H'003B)
FROM NUD (H'371) EXE A IN LIM 001
TO RMP (H'319) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 21
WITH 0 1 2 3 4 5 6 7 8 9
000 00 2C 38 03 01 FF FF FF FF FF
010 FF FF FF FF FF FF FF FF FF FF
020 FF
STACK ADDRESS = 02000448
SIGNAL SEND ADDRESS = 0200165C

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 01 C2 20

TIME DATE ERROR CODE
10:41:15 27OCT13 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 020653BA
ENTER
SWSW A-LEVEL SIGNAL BPARTYANS (H'00F7)
FROM TLP60 (H'3BD) EXE A IN LIM 001
TO SLP60 (H'37B) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 82
WITH 0 1 2 3 4 5 6 7 8 9
000 E9 FB 00 00 02 03 82 08 FF 00
010 FF FF 01 00 00 FF FF FF FF FF
020 FF FF FF FF FF 01 00 00 FF FF
030 FF FF FF FF FF FF FF FF 01 00
040 03 FF 00 00 00 FF FF FF FF FF
050 FF FF FF FF FF FF FF FF FF FF
060 FF FF FF FF FF 00 00 FF FF FF
070 FF 00 FF FF 00 FF FF 00 00 00
080 00 00
STACK ADDRESS = 0201F72E
SIGNAL SEND ADDRESS = 0201FB3C

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 02 19 C8

TIME DATE ERROR CODE
14:58:00 26OCT13 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02033344
BRANCHVALUE = 00010004
ENTER
HWSW A-LEVEL SIGNAL GDIDATIN (H'000A)
FROM DEVICE EQU NO 1-3-10-00
TO CTLP (H'173) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 18
WITH 0 1 2 3 4 5 6 7 8 9
000 00 3A 41 D0 0D 20 83 28 77 08
010 C0 81 00 07 82 01 01 00
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 00000000

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 02 59 DC 02 00 2B 8E

TIME DATE ERROR CODE
09:47:25 26OCT13 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02033344
BRANCHVALUE = 00010004
ENTER
HWSW A-LEVEL SIGNAL GDIDATIN (H'000A)
FROM DEVICE EQU NO 1-3-10-00
TO CTLP (H'173) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 18
WITH 0 1 2 3 4 5 6 7 8 9
000 00 3A 45 B5 0D 20 83 28 77 08
010 C0 81 00 07 82 01 01 00
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 00000000

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 02 59 DC 02 00 2B 8E
DIAGNOSTICS FROM LIM 002, LAST HIREI: 08:42:09 26OCT13

TIME DATE ERROR CODE
14:47:42 28OCT13 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 0204232A
ENTER
SWSW A-LEVEL SIGNAL ENTNOPSTA (H'0081)
FROM CMP (H'2D2) EXE A IN LIM 002
TO TLP65 (H'3BE) EXE A IN LIM 002
NUMBER OF DATA BYTES IN SIGNAL = 8
WITH 0 1 2 3 4 5 6 7 8 9
000 00 02 61 0B FF FF FF 00
STACK ADDRESS = 020739C2
SIGNAL SEND ADDRESS = 0207D41E

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 02 10 8E 02 02 0D E4

TIME DATE ERROR CODE
11:42:14 28OCT13 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 0204232A
ENTER
SWSW A-LEVEL SIGNAL RELEASE (H'0086)
FROM RMP (H'319) EXE A IN LIM 002
TO TLP65 (H'3BE) EXE A IN LIM 002
NUMBER OF DATA BYTES IN SIGNAL = 3
WITH 0 1 2 3 4 5 6 7 8 9
000 00 05 66

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 02 10 8E 02 02 0D E4

TIME DATE ERROR CODE
11:42:09 28OCT13 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 0204232A
ENTER
SWSW A-LEVEL SIGNAL RELEASE (H'0086)
FROM RMP (H'319) EXE A IN LIM 002
TO TLP65 (H'3BE) EXE A IN LIM 002
NUMBER OF DATA BYTES IN SIGNAL = 3
WITH 0 1 2 3 4 5 6 7 8 9
000 00 06 67

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 02 10 8E 02 02 0D E4

TIME DATE ERROR CODE
10:23:49 28OCT13 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 0203F3BC
BRANCHVALUE = 0003FFFF
ENTER
HWSW B-LEVEL SIGNAL RFPSTA (H'0005)
FROM DEVICE EQU NO 2-3-22-00
TO CTLP (H'173) EXE A IN LIM 002
NUMBER OF DATA BYTES IN SIGNAL = 7
WITH 0 1 2 3 4 5 6 7 8 9
000 00 38 03 20 03 00 00
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 00000000

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 03 B9 28 02 03 85 6C

TIME DATE ERROR CODE
10:15:13 28OCT13 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 0204232A
ENTER
SWSW A-LEVEL SIGNAL RELEASE (H'0086)
FROM RMP (H'319) EXE A IN LIM 002
TO TLP65 (H'3BE) EXE A IN LIM 002
NUMBER OF DATA BYTES IN SIGNAL = 3
WITH 0 1 2 3 4 5 6 7 8 9
000 00 03 24

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 02 10 8E 02 02 0D E4

TIME DATE ERROR CODE
17:51:24 27OCT13 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 0203F3BC
BRANCHVALUE = 0003FFFF
ENTER
HWSW B-LEVEL SIGNAL RFPSTA (H'0005)
FROM DEVICE EQU NO 2-3-22-00
TO CTLP (H'173) EXE A IN LIM 002
NUMBER OF DATA BYTES IN SIGNAL = 7
WITH 0 1 2 3 4 5 6 7 8 9
000 00 38 03 20 03 00 00
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 00000000

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 03 B9 28 02 03 85 6C

TIME DATE ERROR CODE
10:25:01 27OCT13 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02033344
BRANCHVALUE = 00010004
ENTER
HWSW A-LEVEL SIGNAL GDIDATIN (H'000A)
FROM DEVICE EQU NO 2-3-20-00
TO CTLP (H'173) EXE A IN LIM 002
NUMBER OF DATA BYTES IN SIGNAL = 18
WITH 0 1 2 3 4 5 6 7 8 9
000 00 3B 40 AD 0D 20 83 10 77 08
010 C0 81 00 07 82 01 01 01
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 00000000

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 02 59 DC 02 00 9C 7C

TIME DATE ERROR CODE
09:31:34 27OCT13 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 0203F3BC
BRANCHVALUE = 0003FFFF
ENTER
HWSW B-LEVEL SIGNAL RFPSTA (H'0005)
FROM DEVICE EQU NO 2-3-22-00
TO CTLP (H'173) EXE A IN LIM 002
NUMBER OF DATA BYTES IN SIGNAL = 7
WITH 0 1 2 3 4 5 6 7 8 9
000 00 38 03 20 03 00 00
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 00000000

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 03 B9 28 02 03 85 6C
DIAGNOSTICS FROM LIM 003, LAST HIREI: 08:42:08 26OCT13

TIME DATE ERROR CODE
15:26:11 28OCT13 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02033344
BRANCHVALUE = 00010004
ENTER
HWSW A-LEVEL SIGNAL GDIDATIN (H'000A)
FROM DEVICE EQU NO 3-2-30-00
TO CTLP (H'173) EXE A IN LIM 003
NUMBER OF DATA BYTES IN SIGNAL = 18
WITH 0 1 2 3 4 5 6 7 8 9
000 00 39 44 DC 0D 20 83 10 77 08
010 C0 81 00 07 82 01 01 01
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 00000000

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 02 59 DC 02 00 9C 7C

TIME DATE ERROR CODE
15:17:10 28OCT13 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02033344
BRANCHVALUE = 00010004
ENTER
HWSW A-LEVEL SIGNAL GDIDATIN (H'000A)
FROM DEVICE EQU NO 3-2-30-00
TO CTLP (H'173) EXE A IN LIM 003
NUMBER OF DATA BYTES IN SIGNAL = 18
WITH 0 1 2 3 4 5 6 7 8 9
000 00 39 44 D0 0D 20 83 28 77 08
010 C0 81 00 07 82 01 01 00
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 00000000

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 02 59 DC 02 00 2B 8E

TIME DATE ERROR CODE
14:53:58 28OCT13 H'17
FAULTY INDEX
LOGICAL PROGRAM ERROR ADDRESS = 0200AD3E
ENTER
SWSW A-LEVEL SIGNAL ENTCALORGSTA (H'0028)
FROM CMP (H'2D2) EXE A IN LIM 003
TO TLP60 (H'3BD) EXE A IN LIM 003
NUMBER OF DATA BYTES IN SIGNAL = 21
WITH 0 1 2 3 4 5 6 7 8 9
000 00 EA 32 FF 01 00 00 01 01 01
010 00 FF 00 0F 00 00 00 00 00 96
020 01


TIME DATE ERROR CODE
12:13:21 28OCT13 H'11
SIGNAL ENTRY NOT FOUND
SINGLE BUFFERED SIGNAL
ENTER
SWSW A-LEVEL SIGNAL *************** (H'0141)
FROM CMP (H'2D2) EXE A IN LIM 003
TO TLP60 (H'3BD) EXE A IN LIM 003
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 00 E3 C5 01


TIME DATE ERROR CODE
10:48:24 28OCT13 H'34
RECEIVING LIM ADDRESS NOT AVAILABLE
LOGICAL PROGRAM ERROR ADDRESS = 02022ADE
ENTER
SWSW A-LEVEL SIGNAL *************** (H'0000)
FROM PRP (H'004) EXE A IN LIM 003
TO CTLP (H'173) EXE A IN LIM 003
NUMBER OF DATA BYTES IN SIGNAL = 5
WITH 0 1 2 3 4 5 6 7 8 9
000 00 08 08 F3 B4

SEND
SWSW A-LEVEL SIGNAL USRCLR (H'0087)
FROM CTLP (H'173) EXE A IN LIM 003
TO IMP (H'2FA) EXE A IN LIM 255
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 FF FF FF 00

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 E3 C4

TIME DATE ERROR CODE
10:48:09 28OCT13 H'34
RECEIVING LIM ADDRESS NOT AVAILABLE
LOGICAL PROGRAM ERROR ADDRESS = 02022DBC
ENTER
HWSW A-LEVEL SIGNAL GDIDATIN (H'000A)
FROM DEVICE EQU NO 3-0-30-00
TO CTLP (H'173) EXE A IN LIM 003
NUMBER OF DATA BYTES IN SIGNAL = 18
WITH 0 1 2 3 4 5 6 7 8 9
000 00 3B 47 F8 0D 20 13 28 77 08
010 C0 81 00 07 82 01 01 00
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 00000000

SEND
SWSW A-LEVEL SIGNAL USRSTA (H'002D)
FROM CTLP (H'173) EXE A IN LIM 003
TO IMP (H'2FA) EXE A IN LIM 255
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 FF FF FF 03
STACK ADDRESS = 0200B3B4
SIGNAL SEND ADDRESS = 02022DBC

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 B3 B4

TIME DATE ERROR CODE
10:48:07 28OCT13 H'13
FAULTY POINTER
LOGICAL PROGRAM ERROR ADDRESS = 0202861E
ENTER
SWSW A-LEVEL SIGNAL USRREL (H'00FF)
FROM IMP (H'2FA) EXE A IN LIM 003
TO CTLP (H'173) EXE A IN LIM 003
NUMBER OF DATA BYTES IN SIGNAL = 5
WITH 0 1 2 3 4 5 6 7 8 9
000 01 02 7D 00 00

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 E7 EC

TIME DATE ERROR CODE
19:51:09 27OCT13 H'13
FAULTY POINTER
LOGICAL PROGRAM ERROR ADDRESS = 0200F1A6
ENTER
SWSW A-LEVEL SIGNAL USRPRO (H'00EF)
FROM IMP (H'2FA) EXE A IN LIM 003
TO CTLP (H'173) EXE A IN LIM 003
NUMBER OF DATA BYTES IN SIGNAL = 20
WITH 0 1 2 3 4 5 6 7 8 9
000 01 38 3E 00 3C CA 02 FA 03 0B
010 00 FF FF FF FF FF 00 00 00 00


TIME DATE ERROR CODE
10:35:36 27OCT13 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 020653BA
ENTER
SWSW A-LEVEL SIGNAL BPARTYANS (H'00F7)
FROM TLP60 (H'3BD) EXE A IN LIM 003
TO SLP60 (H'37B) EXE A IN LIM 003
NUMBER OF DATA BYTES IN SIGNAL = 82
WITH 0 1 2 3 4 5 6 7 8 9
000 18 1F 00 00 02 03 82 08 FF 00
010 FF FF 01 00 00 FF FF FF FF FF
020 FF FF FF FF FF 01 00 00 FF FF
030 FF FF FF FF FF FF FF FF 01 00
040 03 FF 00 00 00 FF FF FF FF FF
050 FF FF FF FF FF FF FF FF FF FF
060 FF FF FF FF FF 00 00 FF FF FF
070 FF 00 FF FF 00 FF FF 00 00 00
080 00 00
STACK ADDRESS = 0201F72E
SIGNAL SEND ADDRESS = 0201FB3C

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 02 19 C8

END
<

 

[ceejay55]

Its time to "bite the bullet" and upgrade to BC13/TSW

 

[parnum]

Yes, Omissam please re-read my post, your problem may be able to be fixed with a patch at BC12 but you can't get the patch, so you have to upgrade, it fixed the problem at my site!

Sending me lost signals won't help you. Upgrade.

Best parnum

 

[Omissam]

Ok Parnum on MD110 BC12 is connected to another pabx in QSIG updated TSW SP07/SP07 (MX-ONE) I can configure the ELU32 on this?
I would avoid such a change release.
I solved all the problems?

Bye, Max

 

[parnum]

I would recommend you replace the ELU32 with IPLU, ELU32 is an old card. You can try ELU32 in TSW SP7 and if you have a problem, you can then go to aastra for software support at least. As we do not know what your real problem is with the software, nobody can say it will certainly be solved, but you will be able to get it solved as TSW SP7 is supported.

best parnum

 

[whosrdaddy]

forget about the ELU32, it is a shitty(sic) unstable board. IPLU is the real deal...

-----------------------------------------------------
Helping people is my job...

 

[Omissam]

But IPLU boards can be replaced instead of ELU32 even if I have a BC12 SP/10?

Bye Max

 

[ceejay55]

No -only supported BC13

 

[Omissam]

I understand .... you can not replace older cards ELU32 with the IPLU why change is necessary but release on the same telephone exchange is connected in QSIG another pabx MX-ONE (TSW SP07/SP07) i could install the IPLU on this , or check the old ELU32
Do you think you could work?


Pardon for my english



Bye Max

 

[whosrdaddy]

ELU32 boards are known to block, it's sad but true.
Your best option is to upgrade to TSW or TSE and use IPLU boards on both sides.
If you can't upgrade your BC12 system then you'll have to live with this problem...

/Daddy

-----------------------------------------------------
Helping people is my job...