Problem with PROCESS

[SolGar]

Hi everybody. First of all I'm from Mexico and don't speak English very well but I'll try to explain me correctly.

I used to work with Clarion 4 and migrated to Clarion 6. I'm glad with the new stuff it has, but i have a problem: When I use a PROCESS (or UNIVPROCESS) to fill a QUEUE, I can't switch to any other application already running (MS Office for example).

With Clarion 4 i didn't have that problem. I expect your comments. Thanx.

 

[ShankarJ]

Hi!

Please check your Window properties to see if you have set it to MODAL. Also, is the MDI Child Ticked?

Regards

 

[SolGar]

Thanx ShakarJ for your help but I have some questions:

I work with a process and I don't have 'Window Properties' but 'Process Properties'
Do you tell me to set MODAL in 'Window Behavior'? or should I set it as MDI?

Thanx again!

 

[ShankarJ]

Hi!

When you in the Windows Formatter (i.e. clicking on the Window button in a procedure), choose the window's frame and right click and choose Properties. Make sure that MODAL is not ticked and MDI Child is Ticked. I assume this process is being called from another procedure which has been STARTed i.e. in MDI mode.

Regards