Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

problem with PPPoe with 200R

Status
Not open for further replies.

WilkoB

Technical User
May 13, 2004
20
NL
hope someone can help me with this one:

I have a 200r behind a bridged zyxel modem/router. I was able to get the external IP address on the 200R and was able to connect to it from the internet, but after a few days the connection was dead??!! After resetting the modem and the 200R everything worked again.
I called my ISP and they told me that there is a "lease time" of 30 hours on the connection and if that the need a new login after this time??

I have never heard of this before and have no idea to get around this with the 200R. Anybody have an idea how I could do this?
If the 200R cannot do this I could switch my Zyxel back to the router mode, but how do I then get a connection with the 200R from the outside??

I look forward to your inputs
 
Try playing around with the Advanced PPPoE settings.
 
Same issue here with connection dropping. In router mode no route back in via symantec. Outgoing drops but for me after 5 mins because of the dial on demand feature. Have you trid looking in your modems logs to find the routes default gateway so you can enter that in the keep alive url/ip on firewall?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top