I have a xerox 8200 with an error...but because werox charges so much (I live on Vancouver Island - no local sevice rep) I puchased a used machine on ebay only to get it here to find it had a falty print head! So I swapped printheads but now the new machine will not complete a heating up cycle and just fills the tray so I end up with a meassage to empty tray. Doing this just starts the heating cycle over! Anyone know what I could do to rectify this?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
problem with my xerox 8200
- Thread starter bobrado
- Start date
You say heating cycle and I will assume you mean cleaning cycles. I have run into this only once on the solid ink printers and it took a new printhead to correct the problem. My first guess is the printhead since you seem to have a totally new problem after replacing the head. Thats not saying it couldnt be power control board either as most of the sensor functions route through that board.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question