Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Problem with ISDN

Status
Not open for further replies.

Supportvzla

Technical User
Oct 9, 2002
137
VE
I have 2 Option 11C. the first one has a DID (R2MF) conection with the public switch. This Pbx tandems to a second pbx (11C) through an ISDN tie.
In the first Pbx I activated the CNA in the Did trunks (incoming from the public network) so I can see the phone number of the person that is calling.
The problem is that I cannot see this number in the second Pbx

Am I missing something?

supportvzla
 
I think you can set this as a RCAP on your route. This spesifies the capabilities of the users of the route. If it's a PRI you do it on the DCH in LD 17, if it's a BRI you do it in the RDB. Check your NTP for the right RCAP option. Good luck. :)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top