Problem with IBM 4-Port 10/100 Base-TX Ethernet

[altar]

Hello;

I search where i can download the microde for IBM 4-Port 10/100 Base-TX Ethernet.

I have this EC level : H10486

Do you know if it's the last EC level for this card?

i don't find this card on the ibm microcode download page

I search this because i have a little problem...

I have three partitions on regatta P690,all partitions are the same with the same level of AIX and the same network configuration.

On the partition a ,there's no problem.

Sometimes,on the partition b and c ,i cannot logged on,nslookup doesn't respond.

I try to stop and start tcpip but it doesn't work.

I must reboot and after all works fine.

If someone is interested, i have an ip trace when the system's wrong. (i don't know how to analyse an ip trace)

If you have an url for download the new EC level for this card,it will be cool.

This is the FRU P/N of this card : FRU Number..................09P1421

Thanks

 

[franksoprano]

altar,

I cannot give you a answer right now, but when I go back in to the office this weekend, I will check out what the level running on my 4-ports is..

By any chance have you tried swapping out the cards? Have you tried adding the working card to the other partitions that are having trouble?