PROBLEM WITH GROUP JUNTOR LINE

[azahel]

I have problems with Group junctor line.

<CADAP;CALENDAR DATA
IDENTITY=AZAHEL
VERSION=LZY2035174/6/BC10CNA143/R5A



<GJLSPRINT=FAULTY; GROUP JUNCTOR LINE STATUS
EQU = 1-0-00-0 GS-MULT 0-0
GS SIDE 0 ACTIVE ACTIVATED NOT SIGNALLING NO CLOCK CONTROL
SIDE 0 ALARM 0000 1000 0000 0000


EQU = 1-0-10-0 GS-MULT 0-1
GS SIDE 0 ACTIVE ACTIVATED SIGNALLING NO CLOCK CONTROL
SIDE 0 ALARM 0000 1000 0000 0000


EQU = 2-0-10-0 GS-MULT 0-10
GS SIDE 0 ACTIVE ACTIVATED NOT SIGNALLING NO CLOCK CONTROL
SIDE 0 ALARM 0000 0000 1000 0000


EQU = 1-1-00-0 GS-MULT 0-16
GS SIDE 0 ACTIVE NOT ACTIVATED NOT SIGNALLING NO CLOCK CONTROL
SIDE 0 ALARM 0010 0000 0000 0001

SIDE 0 CONFIG: NOTHING CONNECTED OR NO CONTACT WITH GJU_G

EQU = 1-1-10-0 GS-MULT 0-17
GS SIDE 0 ACTIVE NOT ACTIVATED NOT SIGNALLING NO CLOCK CONTROL
SIDE 0 ALARM 0010 0000 0000 0001

SIDE 0 CONFIG: NOTHING CONNECTED OR NO CONTACT WITH GJU_G

EQU = 2-1-00-0 GS-MULT 0-18
GS SIDE 0 ACTIVE ACTIVATED NOT SIGNALLING NO CLOCK CONTROL
SIDE 0 ALARM 0010 0000 0000 0001

SIDE 0 CONFIG: NOTHING CONNECTED OR NO CONTACT WITH GJU_G

EQU = 2-2-00-0 GS-MULT 0-19
GS SIDE 0 ACTIVE NOT ACTIVATED NOT SIGNALLING NO CLOCK CONTROL
SIDE 0 ALARM 1010 0000 0000 0001

SIDE 0 CONFIG: NOTHING CONNECTED OR NO CONTACT WITH GJU_G

 

[parnum]

check Group Switch - GJUG connection in 5th card from left in Group switch for GSMULT 0-16 to 0-19, the cable is not connected or card is faulty.

Make connection good and do SCEXI; and SCICI; and GJLSPRINT=FAULTY; x2 to check log again.

best parnum