Problem with External Call forwarding

[AC427]

Hi,

Im having a problem with call forwarding a type 500 set. The config was recently changed to allow call forwarding to 12 digit numbers, and this works when an internal phone calls it, but when the phone is called from an external number it doesnt work and the calls forward to the switchboard.

Below is the config.

DES SE450
TN 020 0 00 00
TYPE 500
CDEN 4D
CUST 0
WRLS NO
DN 5148 0 MARP
AST NO
IAPG 0
HUNT 7000
TGAR 1
LDN NO
NCOS 4
SGRP 0
RNPG 11
LNRS 16
XLST
SCI 0
SCPW
SFLT NO
CAC_MFC 0
CLS TLD DTN FBA XFA WTA THFD FNA HTA ONS
LPR XRD AGRD CWD SWD PUA MWA RMMD SMWD LPD XHD CCSD LNA TVD
CFTA SFA MRD C6D CNID CLBD AUTU
ICDD CDMD EHTD MCTD
GPUD DPUD CFXA ARHD OVDD AGTD CLTD LDTD ASCD
MBXD UDI RCC HBTD IRGD IAMD DDGA NAMA MIND
NRWD NRCD NROD CRD PRSD MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
USRD BNRD OCBD RTDD RBDD RBHD FAXD PGND FTTC
RCO 0
PLEV 02
AACS NO
MLWU_LANG 0
FTR CFW 12
FTR FDN 7000
FTR EFD 7000
FTR EHT 7000


Thanks

 

[Reusser]

Check CDB
LD 21
REQ: prt
TYPE: rdr
TYPE RDR_DATA
CUST 0

TYPE RDR_DATA
CUST 00
OPT CFO CFRA PVCD CWRD <--- if CFO , chg to CFF

ld 15
REQ: chg
TYPE: rdr
TYPE RDR_DATA
CUST 0
opt: cff