Im using a DELL PERC4 Raid controller for a Raid5 configuration. I have SBS 2000 installed on it, everything has been working just fine however, I was performing a test of the RAID by physically removing one of the HDD and booting the system. It boot up just fine. Then I removed another HDD (Total of 2)The system would not boot. I placed both HDD back into the server with the same working configuration. They system will still not boot up.
All HDD are recognized by the RAID BIOS at startup. It gives error "No OS Found" Do i have to rebuild the RAID through the RAID utility? Will any data be lossed? Is there a reason why this happened?
All HDD are recognized by the RAID BIOS at startup. It gives error "No OS Found" Do i have to rebuild the RAID through the RAID utility? Will any data be lossed? Is there a reason why this happened?
