Hi there,
I am detecting a problem of delay of tone in calling for about 10-20 seconds from one PABX to another.
What I did is: checked alarm on suspicious sides and it said:
Distribution on counter in program units increased (alarm class 1).
Next, I checked program units with command HIMDP.
So, I tried with restart of program units.
Beside that, I restart TMU boards on both PABX.
From node to node alarm class 1 appeared on two PABX nodes
Also as measure of checking I checked routes, route parameters.
What could be done, as it seems that problem could increase.
In advance thankful I'm waiting of help from some senior in maintining MD110.
I am detecting a problem of delay of tone in calling for about 10-20 seconds from one PABX to another.
What I did is: checked alarm on suspicious sides and it said:
Distribution on counter in program units increased (alarm class 1).
Next, I checked program units with command HIMDP.
So, I tried with restart of program units.
Beside that, I restart TMU boards on both PABX.
From node to node alarm class 1 appeared on two PABX nodes
Also as measure of checking I checked routes, route parameters.
What could be done, as it seems that problem could increase.
In advance thankful I'm waiting of help from some senior in maintining MD110.