Problem with ARCServe Manager on Neware 5.1

[cderow]

Hello,
Recently, I have had to re-install the ARCServe Manager on to my workstation and I cannot seem to get the manager software talking to the server.

I have put both the server and workstation name and IP address in both HOSTS files and edited my registry with this registry key, per CA's technical document #19110:

HKEY_LOCAL_MACHINE\SOFTWARE\ComputerAssociates\ARCServeIT\BASE\Alternate\FILE with the decimal value set to 5000.

After all of this, I cannot get this up and running, is there something I missed or is there a trick I don't know about? Thanks for the help.

 

[8arcserve]

Try these two links

How Do I see which Ports are being used on my server?
Product: ARCserve, ARCserveIT

http://support.ca.com/techbases/asnw7/asnw7_18070.html

Conflict between ARCserve and NetWare NFS

http://support.novell.com/cgi-bin/search/searchtid.cgi?/10065725.htm

Use the CATIRPC -d command to see if its a problem with ports that are already in use. Changed the ipport to 120 on my Netware server and this solved the problem of commuication with Arcserve manager.

ca + arcserve =