Problem with a TNT2 Pro (Diamond Viper 770)

[Avatar]

I have a Diamond Viper 770 (TNT2 Pro) and i have a couple of problems, the first of them is that i dont know how to configure the card to work in AGP x4 mode...and the other problem (this is the one that worries me more) is that in the video properties tell me that the card is being used in PCI mode and i dont know why, is that right?? if not, how i change it to AGP mode??

Well Thanks...

 

[paparazi]

Dending on your motherboards bios type you should see a AGP/PCI option on one of the bios setup screens.
Usually press the delete or F2 button when prompted on boot to get into the bios setup.
Also there is sometimes an AGP 2X/ 4X option but on later boards this is automaticly set by the motherboard which senses the graphics cards abilities. Martin Please let members know if there advice has helped any.