Problem Sending CALLER ID (ANI)

[diegokpy]

hello I have two TRUNKs, the first is an E1 that receives incoming calls, and then sends it to the second that is a SIP TRUNK against an SBC.
The problem is that the CALLERID number that was sent through the SIP TRUNK is cut off in the last digit. I share the TRACE.

Like you see, the last number in this case "6", its deleting.

Some idea?

 

[phoneguy55]

I would take a look at public unknown. 'change public'

 

[diegokpy]

I share de PUBLIC

 

[diegokpy]

Ok, share the publib table.

 

[lopes1211]

Try "change tandem" and see if you're stripping a digit there.

-CL

 

[diegokpy]

Hi, nop its not working. With tandem setting.