problem on rondi

[cuneyt2919]

Hi all,
We have 3 MD110 on differen cities A B and C

A is the city that the staff works. When the staff calls PSTN on B city, the call goes to the MD110 on B city and it goes to the telecom. It's same for C city..

The problem is i want to send ANI to telecom 4589800 for city B and 3452000 to telecom C ... How can i do this?
As a summary if the extension 4061 wants to call someone in city B the ANI number should be seen as 4589800 but, if the extension call someone in city C, then the number should be seen as 3542000 on public network.

Extension 4061 is on "city A md110" and here is the parameters for 4061

<KSCAPIR=4061;
KEY SYSTEM CATEGORY PRINT
DIR TRAF SERV CDIV ROC ITYPE TRM ADC LANG
4061 00151515 12131201 011130000 000001 20 0 20100103010 F

END

The route parameters between A and B on MD110 A (Route 94)

<rodap:ROU=94;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
94 SL60 H'00000350 H'15580000 H'46400010 NO

END

<rocap:ROU=94;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
94 711000000000001 5 3110000001 0 30 128 00151515 111100000031 001100

END

route parameters between A and C on Md110 A (route 98)


<rodap:ROU=98;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
98 SL60 H'00000350 H'15580000 H'46200010 NO

END

<rocap:ROU=98;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
98 711000000000001 5 3110000001 0 30 128 00151509 111100000031 001100

END
I added rondp to the telecom routes on "MD110 B" and "MD110 C" exnopu but it did not affect to md110 A subscribers.
Can anybody have any idea?
Thanks in advance