Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Problem on ELU28 1375334/2 r1a
- Thread starter rocap
- Start date
- Thread starter
- #3
quote you post says "Problem on ELU28 1375334/2 r1a
"
To get the board in latest revision:
(Newest version of ELU28 is ROF 137 5334/3 R3A)
Change the PLC prom on the board with
this PLC/REVISION RYS 102 669/1 R1C .
This makes the board ROF 137 5334/3 R3A .
Then if it's still nok okay , replace with new one.
"
To get the board in latest revision:
(Newest version of ELU28 is ROF 137 5334/3 R3A)
Change the PLC prom on the board with
this PLC/REVISION RYS 102 669/1 R1C .
This makes the board ROF 137 5334/3 R3A .
Then if it's still nok okay , replace with new one.
the only way to resolse this problem in my experience is to do an rfexi becouse we have had the same...board system blocked after reload of lim and the board it was ok. After rfexi it was all ok. You can try to change the position of the board for a test in other slot.
- Status
Similar threads
- Locked
- Question