Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
problem in setting for all extn to ring on the same time on a TDA200
- Thread starter remerlin
- Start date
obtsystems
Programmer
have you done it to all lines.
what time mode did you set up dil 1-1
id you ring 601 does all phones ring?
If you change operator from 101 to 601 in prog 006 in day mode does it work
what time mode did you set up dil 1-1
id you ring 601 does all phones ring?
If you change operator from 101 to 601 in prog 006 in day mode does it work
- Thread starter
- #4
The basic premise of a TDA series system is ICD. It's the incoming call distribution schedule. By default, in the old firmware, ICD 1 is 600 and 601 in later versions. When you open up ICD's to program them, they have assignments for access numbers. Since the first 32 or so 600 numbers are preassigned, you can't just change an extension to 60x, you didn't want to do that anyway as extensions are hard coded 1xx,2xx,3xx etc and probably stop at 400 or 500.
Clearly, if you can't ring 601, you don't have 601 or there's only one member in it and that's you
Go back into ICD and review the help files.
LkEErie
Clearly, if you can't ring 601, you don't have 601 or there's only one member in it and that's you
Go back into ICD and review the help files.
LkEErie
if group 1/601 has members and its still can not be accessed by intercom from an ext other than 101 .Create a virgin icd group
add members you want to ring on incoming calls now test ring the new group 60X from intercom do all the phones ring now? If yes go to dil 1:1 settings or pgm 450 and point lines at your new icd group dial in from the outside ....do all phones ring?
add members you want to ring on incoming calls now test ring the new group 60X from intercom do all the phones ring now? If yes go to dil 1:1 settings or pgm 450 and point lines at your new icd group dial in from the outside ....do all phones ring?
You need to set each ext on the ICD group member Imm,Ring,Delay Relay or no ring.
601
ext 101 ring...etc
ext 102 ring...etc
ext 103 ring
ext 104 4 ring delay or Imm, No ring, Ring
Using the No Ring is used if that that may want to answer the call
when it's CO Line Light Flash
601
ext 101 ring...etc
ext 102 ring...etc
ext 103 ring
ext 104 4 ring delay or Imm, No ring, Ring
Using the No Ring is used if that that may want to answer the call
when it's CO Line Light Flash
- Status
Similar threads
- Locked
- Question