Problem in remote access to KX-NS 700 maintenance console 1

[Bowwil]

Hi, everyone

I have a problem in using Panasonic KX-NS 700 maintenance console.

After upgraded to ver. 7, maintenance console can not be accessed at remote site.

When i login the console with INSTALLER LEVEL at remote site.
message "connection from the internet is not allowed" is shown.

Is there anything that I need to set to allow entry from remote thu internet?

Pls help, thank a lot !

 

[WhiteGooner]

Before you upgraded to v7 you needed to adjust the password so as it conformed to the password credentials on v7.

You will need to access it locally and change password to allow remote access.

 

[Bowwil]

Hi, WhiteGonner,

Thank you for your reply.

I have change the password of INSTALLER at local,
but still can not access at remote site with new password.

 

[WhiteGooner]

Hi EDSN,

There are certain rules you need to comply with upper case, lower case and numbers

 

[Bowwil]

Hi WhiteGooner,

Complex combination for password is already used.

 

[obtsystems]

You have to have at least 4 upper 4 lower case letters and 4 numbers or you can’t have remote access

 

[Bowwil]

Hi obtsystems and WhiteGooner,

Thank you so so so so much, problem is solved.

obtsystems,
Thank you for let me know the key point

 

[WhiteGooner]

The passsword must follow these guide lines:

contains THREE different upper case letters from A to Z - contains THREE different lower case letters from a to z
- contains TWO different numbers from 0 to 9 - does not contain sequential characters: “abc” or “1234”

 

[obtsystems]

We were told by Panasonic here it was 4 of each