Problem in AMO

[ali-saleh]

When entering the system and displaying the information of any internal line, the attached message appears

 

[masviss]

Save the database on an external media and on the HDD. Turn off the PBX. Remove the DSCXL module from the socket. If the PBX is duplex, then this is the lower DSCXL module. If the PBX is mono, then this is the only DSCXL module. Remove the SIM card from the slot (see the photo). Clean the contacts on the sim card and on the module with Electra Contact Cleaner liquid. Install the sim in the slot and the module in the slot. Turn on the PBX.

 

[ali-saleh]

The same fonts have been applied, but the problem is still there

 

[RioGrande75]

Can you pls. post a DIS-CODEW;

 

[LoPath]

Covered many times.

https://www.tek-tips.com/search.cfm?q="an+inconsistency+in+your+contracted+software"&action=search

LoPath
Maintain HiPath 4000 V5 & V6, OpenScape Xpert V4 & V6, OpenScape Xpressions V7, OpenScape Contact Center V8, OpenScape Voice V9