DarioMartin
IS-IT--Management
I am starting down the path of doing a CCNA qualification, and have purchased a Cisco 877W-G-A-K9 to practice on (so I can actually use it "live"). I have set up Bridge Groups etc and have managed to access my NAS etc via Wireless. The inside network works just fine.
However I CANNOT access the internet; by that I mean the CD light flashes and then goes solid, indicating I have recognised and (I think ...) authenticated to my line.
However, I do NOT get a PPPoE session established, my PPP light stays ominously dark, and my computer cannot ping any outside network.
I have scoured the internet, Cisco manuals and various possible configurations on different pages and nothing seems to work. So I am hoping someone with experience can take a look at my running-config and tell me what the issue is.
I suspect it lies in the connection between my Dialer and the ATM port and is quite possibly to do with incorrectly configured DNS but I need help. The outside IP address and DNS is set as my ISP specifies a static IP address and primary / secondary DNS addresses (and I am not convinced I have set up the dns correctly anyway ... like I said - just starting out down the CCNA path)
Please could someone take a look at my running-config and offer some advice?
-------------- UPDATE --------------
I ran debug ppp authentication and got following output
Cisco877#
*Mar 1 00:32:19.311: %DIALER-6-BIND: Interface Vi1 bound to profile Di0
*Mar 1 00:32:19.311: Vi1 PPP: Using dialer call direction
*Mar 1 00:32:19.311: Vi1 PPP: Treating connection as a callout
*Mar 1 00:32:19.311: Vi1 PPP: Session handle[AC000017] Session id[0]
*Mar 1 00:32:19.311: Vi1 PPP: Authorization required
Cisco877#
*Mar 1 00:32:19.315: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up
Cisco877#
*Mar 1 00:32:23.687: %DIALER-6-UNBIND: Interface Vi1 unbound from profile Di0
Cisco877#
*Mar 1 00:32:23.691: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to down
So it is an authentication issue - but what?
However I CANNOT access the internet; by that I mean the CD light flashes and then goes solid, indicating I have recognised and (I think ...) authenticated to my line.
However, I do NOT get a PPPoE session established, my PPP light stays ominously dark, and my computer cannot ping any outside network.
I have scoured the internet, Cisco manuals and various possible configurations on different pages and nothing seems to work. So I am hoping someone with experience can take a look at my running-config and tell me what the issue is.
I suspect it lies in the connection between my Dialer and the ATM port and is quite possibly to do with incorrectly configured DNS but I need help. The outside IP address and DNS is set as my ISP specifies a static IP address and primary / secondary DNS addresses (and I am not convinced I have set up the dns correctly anyway ... like I said - just starting out down the CCNA path)
Please could someone take a look at my running-config and offer some advice?
-------------- UPDATE --------------
I ran debug ppp authentication and got following output
Cisco877#
*Mar 1 00:32:19.311: %DIALER-6-BIND: Interface Vi1 bound to profile Di0
*Mar 1 00:32:19.311: Vi1 PPP: Using dialer call direction
*Mar 1 00:32:19.311: Vi1 PPP: Treating connection as a callout
*Mar 1 00:32:19.311: Vi1 PPP: Session handle[AC000017] Session id[0]
*Mar 1 00:32:19.311: Vi1 PPP: Authorization required
Cisco877#
*Mar 1 00:32:19.315: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up
Cisco877#
*Mar 1 00:32:23.687: %DIALER-6-UNBIND: Interface Vi1 unbound from profile Di0
Cisco877#
*Mar 1 00:32:23.691: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to down
So it is an authentication issue - but what?