Prnadmin.dll error in Server Name.

[goddersb]

Sorry for the cross posting

I am trying to create a printer mapping application using the prnadmin.dll, i am getting the error "The parameter is incorrect" when i try to set the parameter" ServerName. I have tried IP address, Logical name etc. But i am unable to get past this issue. If i leave this blank it is creating the port successfully, but if i state the remote machine for which i wish to create the port and then map the printer i can get no further.

My code thus far is listed below;

'First Define the Port
Try
oPort = CreateObject("Port.Port.1")
oMaster = CreateObject("PrintMaster.PrintMaster.1")
WshShell = CreateObject("WScript.Shell")

'Edit for computer name
mstrMachineName = "\\" & Me.DEVICE_NAME

'Edit for IP port name
mstrPortName = "_" & Me.PRINTER_IP_ADDRESS

'Edit for IP address
mstrIPAdress = Me.PRINTER_IP_ADDRESS

'Indicate where to add the port. Double quotes ("") stand for the local computer, which is the default.
oPort.ServerName = "\\34.101.120.8"

'The name of the port cannot be omitted.
oPort.PortName = "LTP99"

'The type of the port can be 1 (TCP RAW), 2 (TCP LPR), or 3 (standard local).
oPort.PortType = 1

'Mandatory for TCP ports. This is the address of the device to which the port connects.
oPort.HostAddress = PRINTER_NAME

'For TCP RAW ports. Default is 9100.
oPort.PortNumber = 9100

'Enable or disable SNMP.
oPort.SNMP = False

'Applies to TCP LPR name, default is LPR
oPort.QueueName = "Queue"

'Byte counting or double spool applies to TCP LPR ports, is disabled by default.
oPort.DoubleSpool = False

'Try adding the port.
oMaster.PortAdd(oPort)

MessageBox.Show("IP Port Add Successful", "Successful", MessageBoxButtons.OK, MessageBoxIcon.Information)

Catch ex As Exception
MessageBox.Show(ex.Message, "Error Mapping Printer", MessageBoxButtons.OKCancel, MessageBoxIcon.Exclamation)
End Try