Privilege Level 0-15 1

[jalee]

Does anyone have a good place/book/etc that defines the Privilege levels 0-15 in great detail?

 

[Supergrrover]

You can find out specific levels for the commands that you want by
show privilege command [command]
Most things are level 15 or level 1. I believe
show privilege all
shows everything with it's correspinding level and
show privilege level [#]
would show just commands at that level.

You can assign different commands to each level and it processes via heirarchy - if you are a level 10, you can execute any command assigned to your level and lower.



Brent
Systems Engineer / Consultant
CCNP, CCSP

 

[castlesmadeofsand]

Also to note, the default for username bla password cisco---
doesn't this default to level 7, or is that the description of the encryption method?

Timmy

 

[chipk]

Here are two articles that will help you to understand privilege levels - you "define" them, set the passwords, and decide what commands they can access yourself. There are two privilege levels defined by default, 0 and 15, 0 being no access to change anything and only run some "show" and other commands, and 15 being able to smash the daylights out of a system if you so choose.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t13/ftprienh.htm

http://articles.techrepublic.com.com/5100-1035_11-5659259-2.html