privacy on a legend 7.0

[phreak23]

Activating privacy on a 8110 on a Legend 7.0 is as follows:
lift handset > get Intercom dial tone > press *31 >hang up

Right??

I get error tones when I do that. She can't activate it in a call by pressing #31 either.

The legend is in Key mode if that matters.

Any help is welcome.

 

[tdaugirdas]

This is out of the single-line phone manual:

To use Privacy when you are not on a call:
1. Lift the handset.
2. To turn Privacy on, dial #31. To turn Privacy off, dial #*31.
To use Privacy when you are on a call:*
1. Put the call on hold by pressing and releasing the Flash button.
For older single-line telephones, press and release the switchhook or Flash button.
2. To turn Privacy on, dial #31. To turn Privacy off, dial #*31.
3. Return to the call by again pressing and releasing the Flash button.
For older single-line telephones, press and release the switchhook or Flash button.

Tom Daugirdas,
President
STCG, Inc.
stcg.com